--Making Overclocking the CCcam --

[crodreamer]

Hi
Some already should know, but here is a way to make overclock the card using the CCcam.
In your original cccam.cfg will:
# SMARTCARD CLOCK FREQUENCY: / dev/sci0
To overclock is only the frequency meter (mhz) and make the line #
Example:
SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000

*This means that the card is working to 5.6 mhz, use this setting a conax card, I spent an ECM time of 0.33 to 0.27 s s Do overclock aims to ensure that the response time of the card is faster, we can see in ECM time, the lower the response time better. There are cards to overclock better than others, the NDS and Irdeto are those aguentam more. If when overclock the card fails to appear in Entitlements, then will have to reduce the frequency:

http://ipdadream:16001/entitlements

I advise before starting see the ECM time of the card, if it does not overclock to make improvements have no reason to do so and better leave as was, increase the frequency gradually to find that work more quickly and is stable with your card, advise starting with a low frequency, for example 4/5mhz, does not recommend the use of readers phoenix to overclock or that the abuse very often, as in danger of burn the card.
It would be useful to respond to topic with the card they have and the speed of which managed to reach overclock.
My favorite is an MTV (conax) and is working to 5.6 mhz
Here let some speeds used by dynt6 who is a member of another forum:

SMARTCARD CLOCK FREQUENCY: /dev/sci0 8200000 (irdeto 0.195 to 0.1370)
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5250000 ( nds ECM 0.210 DOWN TO 0.191

SMARTCARD CLOCK FREQUENCY: /dev/sci0 5300000 ( Sky uk 0.191 DOWN TO 0.172
SMARTCARD CLOCK FREQUENCY: /dev/sci1 5600000 (Digialb conax 0.275 down to 0.178

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8300000 ( BULSAT IREDETO 2 PURPLE 0.215 DOWN TO 0.151

SMARTCARD CLOCK FREQUENCY: /dev/sci1 8420000 ( SHOWTIME IREDETO 2 0.225 DOWN TO 0.141

Thx @be-cool for some info


Regards by @crodreamer

[crodreamer]

Seca2 card best overlock value is 4800000 (4.8mhz) over that you got not better ECM time anymore.
So
SMARTCARD CLOCK FREQUENCY: /dev/sci1 4800000 ( SECA2 CARD )


Please to all member that write clock frequency of yours card here.

Regards

[hergli9]

for the jsc sport irdeto should be like this to worke fine
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000

[kazaa001]

Does my line needs to look like this:

SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000

Or this:
# SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000




Greetz.

[crodreamer]

Does my line needs to look like this:

SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000

Or this:
# SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000




Greetz.

Like this:

SMARTCARD CLOCK FREQUENCY: / dev/sci0 5600000

[crodreamer]

sly card :
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

[crodreamer]

TOTAL TV old card

SMARTCARD CLOCK FREQUENCY: /dev/sci0 6400000 ( nds ECM 0.150 DOWN TO 0.110)

[crodreamer]

SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 7200000 #NL irdeto
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 6200000 #PW betacrypt
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB2 7200000 #Sexvieuw via
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB3 7200000 #MCT irdeto
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB4 7200000 #SRG via2.6

But this is all by using usb smartreader+


CanalDigitaal SECA smartcard overclocked to 6800000
Digiturk Cryptoworks smartcard overclocked to 12000000

Both with Smargo Smartreader+ running on CCcam 2.0.8

Local avg ECM SECA : 0.310ms
Local avg ECM Cryptoworks : 0.130ms

SKY ITALY if you have it in your dreambox you can put this line in your CCcam.cfg:

SERIAL READER: /dev/sci0 6000000

and when you have server then all nds cards run the best on 8000000 mhz, in smartreader + usb


Over clocking value for Viaccses Card

SMARTCARD CLOCK FREQUENCY: /dev/sci0 5500000

this is for viaccess cards.
and when you overclock then you have to see the card in the Entitlements, when it's not showing then you have to put les then 5500000 = 5.5mhz.
this is for a dreambox internal reader !!

[ysaral]

I have a server with ubuntu smargo smartreader+ . I would smargo with the gamma function card in frequency must bring what I have to adjust hotbird nova package? this package has irdeto 2 !!!
thanks

[greeklover]

for the card [noba] more. .SMARTCARD CLOCK FREQUENCY it should I put….pleasant

[galaxie]

HI all I have a problem with my sharing the picture freeze in ccam. before he worked very well when I had time ecm 190m to 230m, the satellite operator increased the ecm delay time 350ms to 500ms, impossible to look at the pictures without freeze, I have three dreambox (dm 600and 2 dm 500) in my local network at home i use seca2 smartcard and gemini Please could someone help me solve this problem thank you all

HI to all my problems on the ecm time I took all my time to face the ecm times for each channel and here are the comments that I saw, I noticed he had two groups of strings, a group ecm time with 320m and another group with 650 ms, and I do these tests

DREAM1 on channel 320ms ecm time and DREAM2 on channel 320ms ecm time resultat = good

DREAM1 on channel 650ms ecm time and DREAM2 on channel 320ms ecm time resultat = good


DREAM1 on channel 650ms ecm time and DREAM2 on channel 650ms ecm time resultat = freeze on picture


I concluded that if both dreambox are on channel that have very high ecm time, we are the pictures freeze on the dreambox to another interval by 10 seconds, but if we put the two dreambox on channels ecm time are low ,it works very well ,if you put one dreambox channel ecm time high and the other on channel ecm time low it works very well, here are my remarks, if it can find solutions to my problem thank you all

[myname70]

Hi, if there is a plugin or other add-on by which we can test the EMC speed and response? Now, I only can see this info on the additional infobar. I have DM800HD, Gemini 3.8 and CCCam 2.0.9

[tvcosimo]

hello or a serveur in premises I have local-2 full Sexview Sky it full you want to exchange msn tv-cosimo@live.de